wholesale Led Flood Lights

This means that when the LED forward bias voltage is 9V, the LDD-350H input will work normally in the range of 12~56VDC. In this case, the converter starts to work at full output. Even if the current is still within the acceptable range of the power supply, the power supply cannot work stably because the voltage is below the minimum operating range and will enter hiccup mode to restart .

This type of problem is related to the moment when the input is turned on. The main cause of the problem is the current converter (DC/DC). If the AC power supply fails to rise to the normal voltage after the power is turned on, the converter will start full power output. At the initial start, DC/DC will gradually increase the output and input power.

The input power formula is as follows: Use a voltage-current converter (DC to DC) Possible problems: Commercially available long-strip lamps or small spotlight products with DC input usually contain voltage-current converters similar to MEAN WELL LDD series or LDH series.

Because the driver needs a certain amount of time from booting to the output rising to the normal voltage, if the input point of the converter is low and there is no soft-start mechanism (the output power gradually increases from low to high), it is possible to increase the output of HLG-320 from 0V to 24V. 2) Before the PSU voltage is successfully established (@230VAC <0. If customers encounter similar problems, it is recommended to confirm the specifications of LED and DC converters before consulting MEAN WELL service personnel for suitable products.

When it enters low wholesale Led Flood Lights, the power supply may not work under normal working conditions and cause problems. Because 24V voltage power supply is more common in practice, it is very likely that 24V power supply will be recommended in the lighting catalog. Voltage-current converters: Generally, there are three types of DC converter architectures commonly used in LED current limiting, boost, buck, or buck-boost. No matter what kind of converter, the allowable value of its input voltage has a wide range of characteristics. Before entering the topic, let me introduce the following three matching modes for common LED lamp circuit drive designs: 1) Direct drive:

 

Megosztás a facebookon